Chemistry Equations and Formulas Cheat Sheet with Worked Examples
chemistryformulasequationsmolescalculationsexam revision

Chemistry Equations and Formulas Cheat Sheet with Worked Examples

SStudy Science Editorial Team
2026-11-13
7 min read

A practical chemistry formulas cheat sheet covering moles, concentration, gases, yield, empirical formulae, rates, acids, and worked examples.

This chemistry formulas cheat sheet brings the most common equations into one practical reference. It explains what each formula means, how to choose the right quantities and units, and how to check your answer with worked examples. Use it for homework, revision, or a final check before a chemistry practice test—but always compare constants, permitted equations, and significant-figure rules with your course or exam board.

Overview

Chemistry calculations become more manageable when you treat each problem as a sequence rather than a hunt for a formula. First identify what the question gives you and what it asks you to find. Next write a balanced equation if the problem involves a reaction. Then convert quantities into compatible units, select the relationship that connects them, substitute values, and check whether the result is chemically reasonable.

The mole is the central idea behind many chemistry equations. It connects measurable quantities—such as mass, solution volume, gas volume, and particle number—to the amount of substance. A formula may look simple, but the units and the chemical ratio often determine whether the calculation is correct.

For broader unit conversions, use the science units and conversions reference table. If you need more practice with reaction calculations, compare your method with the related chemistry formulas and equations guide.

Core framework

1. Moles, mass, and relative formula mass

The basic relationship is:

moles, n = mass, m ÷ molar mass, M

Rearrangements are:

  • mass = moles × molar mass
  • molar mass = mass ÷ moles

Mass is commonly measured in grams, while molar mass is measured in grams per mole. Calculate the molar mass by adding the relative atomic masses in the formula. Do not use the mass of one atom by mistake, and do not round intermediate values unnecessarily.

2. Concentration of solutions

For concentration measured in moles per cubic decimetre:

concentration, c = moles, n ÷ volume, V

Therefore:

  • moles = concentration × volume
  • volume = moles ÷ concentration

When concentration is in mol dm−3, volume must be in dm3. Convert millilitres by dividing by 1,000. If your course uses mol L−1, remember that one litre and one cubic decimetre represent the same volume.

For mass concentration, use:

mass concentration = mass of solute ÷ volume of solution

Check whether the requested answer is in g dm−3, g cm−3, or another unit before substituting.

3. Density

The density equation is:

density, ρ = mass, m ÷ volume, V

Rearrange it as mass = density × volume or volume = mass ÷ density. The mass and volume units must match the density unit. For example, a density in g cm−3 requires mass in grams and volume in cubic centimetres.

4. Gas volume and the ideal gas equation

Some courses use a stated molar gas volume:

moles = gas volume ÷ molar gas volume

The molar gas volume depends on the temperature and pressure conditions, so use the value supplied by the question, data sheet, or course specification rather than assuming one value applies everywhere. Keep gas volume and molar gas volume in the same units.

When pressure, volume, temperature, and amount are given, the ideal gas equation may be used:

pV = nRT

Here, p is pressure, V is volume, n is amount in moles, R is the gas constant, and T is temperature in kelvin. Convert temperature using T in kelvin = temperature in degrees Celsius + 273.15. The correct units for pressure, volume, and R must be used together.

5. Percentage yield and atom economy

Percentage yield compares the amount of product obtained with the maximum amount predicted:

percentage yield = actual yield ÷ theoretical yield × 100

Use the same unit for both yields. The theoretical yield comes from the balanced equation and the limiting reactant, not simply from whichever reactant has the larger mass.

Atom economy describes how much of the reactants becomes the desired product:

percentage atom economy = relative formula mass of desired product ÷ total relative formula mass of reactants × 100

Use the balanced equation when identifying the reactants and desired product. A reaction can have a high percentage yield but a lower atom economy, because these measures describe different features.

6. Empirical and molecular formulae

To find an empirical formula from masses or percentages:

  1. Convert each element’s mass to moles by dividing by its relative atomic mass.
  2. Divide every mole value by the smallest mole value.
  3. Convert the ratio to the smallest whole numbers.
  4. Write the empirical formula using those subscripts.

If the molecular formula is required, calculate:

multiplier = molecular formula mass ÷ empirical formula mass

Multiply every empirical-formula subscript by that whole-number multiplier.

7. Rates and acids and bases

A simple average rate is:

rate = change in quantity ÷ time

The quantity may be mass, volume, concentration, or another measured variable. State the unit, such as g s−1 or cm3 s−1. On a graph, the average rate is found from the gradient between two points; an instantaneous rate uses the gradient of a tangent.

For acids and bases, a common neutralisation relationship is:

moles of solute = concentration × volume

After finding the moles of the known solution, use the balanced chemical equation to apply the mole ratio. Do not assume a one-to-one ratio unless the equation shows it. For a strong acid–strong base calculation, the stoichiometric coefficients still matter.

Practical examples

Example 1: finding moles from mass

Suppose a sample has a mass of 5.85 g and a molar mass of 58.5 g mol−1.

n = m ÷ M = 5.85 ÷ 58.5 = 0.100 mol

The units show that grams have cancelled, leaving moles. If the question then asks for particles, use the particle relationship or constant provided by your course.

Example 2: concentration from a titration volume

A solution contains 0.00250 mol of solute in 25.0 cm3. Convert the volume first:

25.0 cm3 = 0.0250 dm3

Then:

c = n ÷ V = 0.00250 ÷ 0.0250 = 0.100 mol dm−3

Writing the conversion explicitly prevents the common error of dividing by 25.0 and reporting a value that is 1,000 times too small.

Example 3: percentage yield

If a reaction should produce 12.0 g of product but produces 9.00 g in the experiment:

percentage yield = 9.00 ÷ 12.0 × 100 = 75.0%

The answer is below 100%, which is usually consistent with product loss, incomplete reaction, or competing reactions. Do not describe the yield as a percentage until the final multiplication by 100.

Example 4: an empirical formula

Imagine a compound contains 24 g of carbon and 4 g of hydrogen. Using relative atomic masses of 12 and 1:

  • Carbon: 24 ÷ 12 = 2 mol
  • Hydrogen: 4 ÷ 1 = 4 mol
  • Ratio: 2:4, which simplifies to 1:2

The empirical formula is CH2. The ratio, rather than the original masses, determines the subscripts.

Common mistakes

  • Skipping the balanced equation: Write and balance the reaction before using mole ratios.
  • Mixing volume units: Convert cm3 to dm3 when using mol dm−3.
  • Using Celsius in pV = nRT: Convert temperature to kelvin.
  • Confusing mass and molar mass: Mass is the measured sample; molar mass belongs to one mole of the substance.
  • Ignoring coefficients: The numbers in a balanced equation establish the mole relationship.
  • Rounding too early: Keep extra figures during intermediate steps and round at the end according to course guidance.
  • Reporting a number without a unit: A numerical answer is incomplete when its unit is required.
  • Using a memorised gas volume blindly: Check the stated temperature and pressure conditions.

For calculation-heavy homework, show the formula, substitution, unit conversion, and final answer. This makes an error easier to locate and gives you a repeatable method for unfamiliar questions.

When to revisit

Return to this chemistry equations list whenever a new unit appears, you begin a topic that links several calculations, or your teacher introduces a different data sheet or convention. At the start of each school year and before an exam period, check the current course specification for permitted formulae, constants, significant-figure expectations, and gas-volume conventions. These details can vary between courses and exam boards.

Use this four-step review routine:

  1. Cover the formula column and write each relationship from memory.
  2. Choose one question involving moles, one involving concentration, and one involving a reaction ratio.
  3. Mark units and significant figures before checking the numerical answer.
  4. Record the exact mistake—conversion, formula choice, algebra, ratio, or arithmetic—and retry a similar problem later.

For a wider revision routine, pair this guide with the science practice test strategy and keep a short error log. The goal is not to memorise an isolated chemistry formulas cheat sheet; it is to recognise which quantities are connected, use consistent units, and explain why the result makes sense.

Related Topics

#chemistry#formulas#equations#moles#calculations#exam revision
S

Study Science Editorial Team

Science Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.