Titration calculations become much easier when every value is recorded in the same order: choose a concordant titre, calculate the mean volume, convert volume and concentration into moles, use the balanced equation, and then find the unknown concentration. This guide explains that workflow, shows where units and significant figures matter, and provides worked examples and practice questions so you can check your progress after each chemistry practical or revision session.
Overview
A titration is used to determine the concentration of one solution by reacting it with a solution of known concentration. In a typical acid–base titration, a measured volume of one solution is placed in a conical flask and a second solution is delivered from a burette until the reaction reaches its end point. An indicator, or another approved end-point method, helps identify when this has happened.
The calculation is not based simply on comparing the two volumes. Volume must first be converted into moles, and the mole ratio must come from the balanced chemical equation. A reliable calculation therefore follows this sequence:
- Identify concordant titres and calculate a suitable mean volume.
- Convert the mean titre from cm3 to dm3 if using concentration in mol dm−3.
- Calculate the moles of the solution with known concentration.
- Use the balanced equation to find the moles of the unknown substance.
- Calculate the unknown concentration using concentration = moles ÷ volume.
- Check units, significant figures, and whether the answer is chemically reasonable.
Before starting, write the balanced equation. For example:
HCl + NaOH → NaCl + H2O
This equation has a 1:1 mole ratio, but not every titration does. For sulfuric acid reacting with sodium hydroxide, the ratio is different:
H2SO4 + 2NaOH → Na2SO4 + 2H2O
For related revision, practise balancing equations before attempting the calculation: Balancing Chemical Equations Practice.
What to track
1. Burette readings and titre values
Record the initial and final burette readings to the precision required by your equipment and course. Calculate each titre using:
titre = final burette reading − initial burette reading
Do not average the rough titre automatically. The rough run helps locate the end point; subsequent accurate titres are compared for agreement. The definition of “concordant” can vary by course or exam board, so use the tolerance specified by your teacher or practical instructions. If no local instruction is available, look for closely agreeing accurate titres rather than choosing values simply because they produce a convenient answer.
Keep a table containing the rough titre, each accurate titre, and the mean used in the calculation. This makes it easier to spot a copied reading or an arithmetic error.
2. Mean volume
Calculate the mean from the concordant accurate titres only. For example, if the accurate titres are 24.60 cm3, 24.55 cm3, and 24.60 cm3, a suitable mean is:
(24.60 + 24.55 + 24.60) ÷ 3 = 24.58 cm3
Retain enough digits during intermediate calculations. Round at the end in line with the convention used in your course.
3. Units and fixed volumes
Concentration is often given in mol dm−3, while burette readings are recorded in cm3. Convert before using the formula:
volume in dm3 = volume in cm3 ÷ 1000
Thus, 25.00 cm3 is 0.02500 dm3. A common error is to use 25.00 directly in a mol dm−3 calculation, making the mole value 1000 times too large.
4. Uncertainty and experimental notes
Track the stated uncertainty of the burette, pipette, balance, or other equipment used. You may be asked to calculate percentage uncertainty:
percentage uncertainty = absolute uncertainty ÷ measured value × 100
For a titre, consider the uncertainty associated with both the initial and final readings if that is the approach required by your course. Record practical factors that could affect the result, such as an overshot end point, an air bubble in the burette tip, a funnel left in the burette, drops remaining on the flask wall, or glassware that was not rinsed appropriately. Follow laboratory safety instructions, wear the required eye protection, and treat acids, alkalis, and indicators as laboratory chemicals rather than household substances.
Cadence and checkpoints
Use a short checkpoint after every titration, then repeat the calculation at spaced revision intervals. A useful routine is:
- Immediately after the practical: check that every burette reading has been recorded, titres have been calculated correctly, and the mean uses only suitable accurate results.
- Within a week: redo one calculation without looking at the worked solution. Focus on the equation and unit conversion rather than memorising a sequence.
- Monthly during a course: complete a mixed set containing 1:1 and non-1:1 equations, dilution, uncertainty, and evaluation questions.
- Before a mock or final examination: use a timed question and mark each stage separately: mean titre, conversion, known moles, mole ratio, unknown concentration, units, and rounding.
- After marking: record the exact error in an error log. “Got it wrong” is less useful than “used all titres in the mean” or “forgot the 2:1 ratio.”
Worked example: a 1:1 reaction
A student titrates 25.00 cm3 of sodium hydroxide with 0.1000 mol dm−3 hydrochloric acid. The mean titre is 24.60 cm3. The equation is HCl + NaOH → NaCl + H2O.
- Convert the titre: 24.60 ÷ 1000 = 0.02460 dm3.
- Calculate moles of HCl: 0.1000 × 0.02460 = 0.002460 mol.
- Use the 1:1 ratio: moles of NaOH = 0.002460 mol.
- Convert the sodium hydroxide volume: 25.00 cm3 = 0.02500 dm3.
- Calculate concentration: 0.002460 ÷ 0.02500 = 0.0984 mol dm−3.
Worked example: a non-1:1 reaction
Suppose 25.00 cm3 of sulfuric acid is titrated with 0.1500 mol dm−3 sodium hydroxide, using a mean titre of 20.00 cm3. The balanced equation is H2SO4 + 2NaOH → Na2SO4 + 2H2O.
Moles of NaOH = 0.1500 × 0.02000 = 0.003000 mol. The equation shows that one mole of sulfuric acid reacts with two moles of sodium hydroxide, so moles of H2SO4 = 0.003000 ÷ 2 = 0.001500 mol. The acid concentration is 0.001500 ÷ 0.02500 = 0.0600 mol dm−3.
How to interpret changes
If your calculated concentration changes substantially between attempts, investigate the calculation chain instead of changing the final answer to match expectations. First compare the titres. A single unusually large or small titre may indicate an overshot end point or a reading problem, while a consistent shift across all accurate titres may point to a technique or solution issue. Do not discard data without a stated practical reason and teacher guidance.
Next, check the balanced equation and mole ratio. This is especially important when the coefficients are not all one. Then check the volume conversion. A factor-of-1000 error usually comes from mixing cm3 and dm3. Finally, check the fixed pipette volume, arithmetic, and rounding.
Use uncertainty to judge whether a difference is meaningful. A small difference between two calculated values may be consistent with measurement uncertainty; a large difference suggests a procedural or calculation error. Practical-skills revision can help with uncertainty and evaluation language: Science Practical Skills Practice.
Quick practice questions
- What is the mean of concordant titres 18.40 cm3, 18.45 cm3, and 18.40 cm3?
- How many moles are present in 22.50 cm3 of 0.0800 mol dm−3 solution?
- 25.00 cm3 of an unknown monoprotic acid reacts with 0.1000 mol dm−3 sodium hydroxide. The mean titre is 21.30 cm3. Assuming a 1:1 reaction, find the acid concentration.
- In the reaction H2SO4 + 2NaOH → Na2SO4 + 2H2O, why must the sodium hydroxide moles be divided by two to find sulfuric acid moles?
Answers: 1. 18.42 cm3 when rounded to two decimal places. 2. 0.001800 mol. 3. 0.0852 mol dm−3. 4. Because the equation gives a 2:1 mole ratio of sodium hydroxide to sulfuric acid.
When to revisit
Return to this guide after each titration practical, at least monthly during revision, and whenever your course introduces dilution, percentage uncertainty, back titration, or a different mole ratio. Revisit it sooner if you repeatedly lose marks for units, selecting titres, significant figures, or balancing equations. Before an assessment, complete one calculation from raw burette readings rather than starting with a supplied mean; this tests both practical data handling and chemistry.
Use this final checklist before submitting an answer:
- Have I selected appropriate concordant titres?
- Did I subtract the initial reading from the final reading?
- Did I convert cm3 to dm3?
- Did I write and use the balanced equation?
- Did I apply the correct mole ratio?
- Are the final units and significant figures appropriate?
- Does the result make sense, and have I recorded any relevant uncertainty or practical limitation?
For broader chemistry revision, connect titration work with chemistry equations and formulas and use active recall rather than rereading worked answers. Cover the solution, reproduce the workflow from memory, then compare each stage and update your error log.