Chemistry Formulas and Equations Cheat Sheet: Moles, Concentration, Acids, and Reactions
chemistryformulasequationsmolesconcentrationacids and basesratesenergy

Chemistry Formulas and Equations Cheat Sheet: Moles, Concentration, Acids, and Reactions

SStudy Science Editorial Team
2026-11-05
7 min read

A practical chemistry formulas cheat sheet covering moles, concentration, yield, gases, pH, rates, energy, units, and common mistakes.

This chemistry formulas cheat sheet brings the equations you are most likely to use in calculations into one practical reference. It explains what each symbol means, which units to use, how to rearrange the formula, and how to check whether an answer is sensible. Use it for classwork, homework, or chemistry exam prep, then practise applying the equations rather than memorising them in isolation.

Overview

Most chemistry calculations follow the same pattern: identify the quantity being requested, write the relevant equation, convert the data into compatible units, substitute carefully, and report the answer with an appropriate unit. A formula is only useful when you know when it applies.

Before starting any problem, make a short list of the information given. For example, write m for mass, Mr for relative formula mass, n for amount in moles, c for concentration, and V for volume. This prevents you from inserting a volume in cm3 into an equation that requires dm3.

For a wider revision system, pair this reference with the chemistry formulas and equilibrium guide. If you are revising several science subjects, a structured science exam revision planner can help you distribute practice across chemistry, biology, and physics.

Checklist by scenario

1. Moles, mass, and relative formula mass

Use the core equation:

n = m / Mr

  • n is the amount of substance in moles (mol).
  • m is mass, usually in grams (g).
  • Mr is relative formula mass. For an ionic or molecular compound, add the relative atomic masses of all atoms shown in the formula.

Rearrangements are m = n × Mr and Mr = m / n. For example, if a sample has a mass of 5.85 g and an Mr of 58.5, then n = 5.85 / 58.5 = 0.100 mol.

Checklist: calculate the formula mass correctly, keep mass in grams unless your course specifies otherwise, and include the balanced chemical equation if the question involves a reaction.

2. Concentration and dilution

For concentration in mol/dm3, use:

c = n / V

  • c is concentration in mol/dm3.
  • n is amount in moles.
  • V is volume in dm3.

The rearrangements are n = c × V and V = n / c. Convert volume before substituting: 1 dm3 = 1000 cm3, so divide a volume in cm3 by 1000 to obtain dm3.

For a dilution where the amount of solute stays constant, use c1V1 = c2V2. Label the initial and final concentration and volume clearly. This equation is especially useful when a solution is made less concentrated by adding solvent. For a worked method, see how to calculate molarity and dilution problems.

3. Percentage yield and atom economy

Percentage yield compares the actual amount of product with the maximum amount predicted by the balanced equation:

percentage yield = (actual yield / theoretical yield) × 100

The actual and theoretical yields must use the same unit, such as grams or moles. A result below 100% can reflect incomplete reaction, side reactions, transfer losses, or measurement limitations. Do not confuse yield with atom economy.

Atom economy measures how much of the reactant mass appears in the desired product:

atom economy = (Mr of desired product / sum of Mr of reactants) × 100

Use the balanced equation and include the coefficients when calculating the total reactant mass.

4. Gas calculations

When a question supplies a molar gas volume, use:

n = V / Vm

  • V is the gas volume.
  • Vm is the molar volume under the stated conditions.

The required molar volume can depend on temperature and pressure, so use the value given in the question or your course data sheet rather than assuming one value. Make sure the gas volume and molar volume use matching units. If the problem provides pressure, volume, temperature, and amount, it may instead require an ideal-gas relationship such as pV = nRT; use consistent units and the specified value of R.

5. Acids, bases, and pH

For a strong monoprotic acid in a dilute solution, the hydrogen ion concentration may be treated as approximately equal to the acid concentration. Then:

pH = -log10[H+]

Rearrange it as [H+] = 10-pH. Concentration is normally expressed in mol/dm3. The same structure applies to hydroxide concentration with pOH = -log10[OH-]. Whether a shortcut is valid depends on the acid or base and the assumptions stated in your course, so do not apply the strong-acid approximation automatically to weak acids.

For neutralisation calculations, first write and balance the equation. The mole ratio may not be 1:1. For example, sulfuric acid reacts with sodium hydroxide in a 1:2 ratio, so the balanced equation is H2SO4 + 2NaOH → Na2SO4 + 2H2O.

6. Rates and energy changes

A simple average rate can be written as:

rate = change in quantity / time taken

Depending on the experiment, the quantity may be mass, concentration, gas volume, or another measured variable. State the units, such as g/s, cm3/s, or mol/dm3/s. Use the same time unit throughout.

For energy transferred per unit mass, use q = mcΔT, where q is energy in joules, m is mass in grams or kilograms according to the specific heat capacity unit, c is specific heat capacity, and ΔT is the temperature change. For reaction energy, carefully distinguish between energy released and energy absorbed, and follow the sign convention used by your course.

What to double-check

  1. Units: Convert cm3 to dm3 when using mol/dm3, and check that gas units match the supplied molar volume.
  2. Equation balance: Conservation of atoms comes before any mole-ratio calculation. Balance the equation, then use its coefficients.
  3. Significant figures: Avoid reporting more precision than the measurements support. Follow any specific instruction in the question.
  4. Substitution: Write the numbers and units into the formula before calculating. This makes an incorrect variable or conversion easier to spot.
  5. Reasonableness: A concentration should not become larger merely because solvent was added. A percentage yield should normally be interpreted in relation to 100%, and a negative temperature change should match the direction of the experiment.
  6. Conditions and assumptions: Check whether the question specifies temperature, pressure, strong or weak acid, excess reactant, or a particular data-sheet value.

For reaction calculations, use a table with columns for the substance, amount in moles, mole ratio, and final quantity. This is often clearer than trying to complete several operations in one line.

Common mistakes

  • Using the mass equation n = m / Mr without first finding the correct formula mass.
  • Putting a cm3 volume directly into a mol/dm3 concentration calculation.
  • Ignoring coefficients in a balanced equation when converting between reactants and products.
  • Using the wrong molar gas volume because the conditions were not checked.
  • Confusing concentration with amount. A larger volume does not automatically mean a larger concentration.
  • Typing a pH calculation into a calculator without brackets or checking whether the answer has the expected scale.
  • Rounding intermediate answers too early, which can alter the final result.
  • Memorising equations without practising the decision that comes first: identifying which relationship the question describes.

When stuck, write the known values and the target quantity, draw a unit map, and ask what must be calculated first. This turns many multi-step problems into smaller, checkable stages.

When to revisit

Return to this chemistry study guide before each new unit, revision cycle, and practice test. Revisit the gas section whenever your course or data sheet uses different temperature or pressure conditions, and revisit acid-base shortcuts when moving between strong and weak electrolytes. Formula sheets may also differ between GCSE, A-level, AP, and other courses, so compare this reference with the equations your teacher or exam board permits.

Use this five-minute reset before an assessment:

  1. Cover the explanations and write the core formulas from memory.
  2. Choose one question involving moles, one involving concentration, and one involving a balanced equation.
  3. Underline every unit and convert before substituting.
  4. Check one answer by estimating its size and one by reversing the formula.
  5. Mark any formula you could not apply confidently, then practise that type of chemistry practice question again.

For further study, connect calculation practice with a step-by-step approach to answering science exam questions. The goal is not to copy a formula sheet into memory; it is to recognise the chemical situation, select the relationship, show the working, and explain whether the result makes sense.

Related Topics

#chemistry#formulas#equations#moles#concentration#acids and bases#rates#energy
S

Study Science Editorial Team

Science Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.