Science units and conversions become much easier when you identify the quantity, choose a consistent unit system, and show each step with dimensional analysis. This reference guide brings together the SI units, metric prefixes, common chemistry and physics quantities, temperature rules, and practice questions you need for homework, revision, and exam calculations.
Overview
A unit tells you what a measured number represents. In 5 m, for example, “5” is the numerical value and “m” means metres. A calculation can look correct while still being wrong if the units are missing, mixed, or used in an incompatible formula.
The International System of Units, usually called SI, provides a common framework for science. You will often see SI units in physics, chemistry, biology practical work, and science exam questions. The most useful base units for school and introductory college calculations are:
| Quantity | SI unit | Symbol |
|---|---|---|
| Length | metre | m |
| Mass | kilogram | kg |
| Time | second | s |
| Temperature | kelvin | K |
| Amount of substance | mole | mol |
| Electric current | ampere | A |
| Volume | cubic metre | m³ |
Derived units combine base units. For example, speed is measured in metres per second (m/s), density can be written as kilograms per cubic metre (kg/m³), and force is measured in newtons (N), which is equivalent to kg·m/s². Some courses use grams, centimetres, millilitres, or litres for convenience. These units are valid, but you must convert them when a formula or answer requires a particular system.
Use this page alongside a physics equations guide or a chemistry formulas and equations cheat sheet when checking which units a formula expects.
What to track
Metric prefixes
Metric prefixes show powers of ten. Memorising the most common ones helps you move a decimal point confidently, but writing the power of ten is safer in multi-step problems.
| Prefix | Symbol | Multiplier | Example |
|---|---|---|---|
| kilo | k | 10³ | 1 km = 1,000 m |
| centi | c | 10⁻² | 1 cm = 0.01 m |
| milli | m | 10⁻³ | 1 mm = 0.001 m |
| micro | µ | 10⁻⁶ | 1 µm = 0.000001 m |
| nano | n | 10⁻⁹ | 1 nm = 0.000000001 m |
Area and volume require extra care. Converting 1 cm to metres gives 0.01 m, but converting 1 cm² to m² requires squaring the conversion factor:
1 cm² = (0.01 m)² = 0.0001 m²
Likewise, 1 cm³ = (0.01 m)³ = 0.000001 m³. This is a frequent source of errors in density, pressure, and geometry questions.
Common quantities in chemistry and physics
| Quantity | Common formula or relationship | Typical units |
|---|---|---|
| Speed | distance ÷ time | m/s, km/h |
| Acceleration | change in velocity ÷ time | m/s² |
| Force | mass × acceleration | N or kg·m/s² |
| Energy or work | force × distance | J |
| Power | energy ÷ time | W or J/s |
| Pressure | force ÷ area | Pa or N/m² |
| Density | mass ÷ volume | kg/m³, g/cm³ |
| Concentration | amount ÷ volume | mol/dm³, mol/L |
| Frequency | number of cycles ÷ time | Hz or s⁻¹ |
Density
The density equation is:
density = mass ÷ volume
Rearrange it as mass = density × volume or volume = mass ÷ density. Before substituting values, check that the mass and volume use compatible units. A useful relationship is:
1 g/cm³ = 1,000 kg/m³
For example, a sample with a mass of 240 g and a volume of 80 cm³ has a density of 3 g/cm³. If you need the answer in kg/m³, multiply by 1,000 to obtain 3,000 kg/m³.
Concentration and volume
For molar concentration, the usual relationship is:
concentration = amount of substance ÷ volume
When concentration is measured in mol/dm³, the volume must be in dm³. Remember that 1 dm³ = 1 L = 1,000 cm³ = 1,000 mL. Therefore, 250 mL is 0.250 L or 0.250 dm³, not 250 dm³.
In a dilution calculation, the commonly used relationship is C₁V₁ = C₂V₂, provided the two volumes use the same unit. For step-by-step examples, see how to calculate molarity and dilution problems.
Energy, pressure, and volume
Energy is often measured in joules (J). Power is measured in watts (W), where 1 W equals 1 J/s. Pressure is measured in pascals (Pa), where 1 Pa equals 1 N/m². If a question gives an area in cm², convert it to m² before using the pascal relationship.
For volume, keep these common conversions available:
- 1 L = 1 dm³
- 1 mL = 1 cm³
- 1 L = 1,000 mL
- 1 m³ = 1,000 L
Time and temperature
Time conversions are straightforward but easy to overlook in rates and power calculations:
- 1 minute = 60 seconds
- 1 hour = 3,600 seconds
- 1 day = 24 hours
For temperature, the size of one degree Celsius is the same as the size of one kelvin, but their zero points differ. Use:
T(K) = T(°C) + 273.15
For many school calculations, 273 may be used as a suitable approximation if the question or course permits it. Celsius to Fahrenheit conversions are separate from SI work and should use the appropriate stated formula.
Cadence and checkpoints
Do not wait until an exam to review units. Build a small conversion check into each calculation session. At the start of a topic, write down the quantities, formula, expected units, and any conversions needed. During practice, keep a short error log with entries such as “forgot to square area conversion” or “used mL instead of L.” Review that log weekly or whenever you begin a new calculation topic.
A useful three-stage checkpoint is:
- Before calculating: underline every measured value and write its unit beside it. Identify whether the formula requires base units, a chemistry-specific unit, or another stated unit.
- During calculating: convert one quantity at a time. Show the conversion factor rather than relying only on mental decimal movement.
- After calculating: check whether the final unit matches the quantity asked for and whether the size of the answer is reasonable.
For science exam preparation, mix conversion questions into ordinary biology, chemistry, and physics practice instead of studying them only as a separate list. A biology practical may involve magnification or scale, chemistry may involve concentration and volume, and physics may combine distance, time, mass, and force in one problem. The science exam revision planner can help you place these checks into a broader revision routine.
How to interpret changes
Dimensional analysis treats units like algebra. Multiply by a conversion factor equal to one so the unwanted unit cancels:
72 km/h × (1,000 m / 1 km) × (1 h / 3,600 s) = 20 m/s
The kilometres and hours cancel, leaving metres per second. This arrangement is safer than guessing whether to multiply or divide because the desired unit determines the direction of the conversion.
For example, convert 450 mg to grams:
450 mg × (1 g / 1,000 mg) = 0.450 g
Notice that “mg” appears in both the numerator and denominator and cancels. If the units do not cancel as intended, stop and rearrange the conversion factor.
Use the same approach for compound units. To convert 2.5 g/cm³ to kg/m³, convert grams to kilograms and cubic centimetres to cubic metres:
2.5 g/cm³ × (1 kg / 1,000 g) × (1,000,000 cm³ / 1 m³) = 2,500 kg/m³
Also distinguish between a unit conversion and a change in the physical quantity. Converting 2 minutes to 120 seconds does not alter the duration. However, changing Celsius to kelvin requires adding the difference between the scales because their zero points are different.
When an answer seems surprising, check four things: the prefix, whether an area or volume was squared or cubed, whether the formula was rearranged correctly, and whether the final unit is appropriate. A calculator can preserve a mistake, so unit reasoning should come before numerical confidence.
When to revisit
Return to this reference whenever a new topic introduces an unfamiliar unit, when an answer key disagrees with your result, or when you move between biology, chemistry, and physics conventions. Revisit it before practical work involving measurements and during exam revision, especially after identifying repeated unit errors.
Keep a personal one-page version with the prefixes and conversions you actually use. Update it when your teacher, textbook, or exam specification requires a particular convention, significant-figure rule, or permitted unit. The underlying SI relationships are stable, but course expectations can differ in notation and rounding.
To finish a study session, try this short conversion practice set without looking at the answers:
- Convert 3.6 km to metres.
- Convert 750 mL to litres.
- Convert 0.004 m² to cm².
- A 150 g object occupies 50 cm³. Find its density in g/cm³.
- Convert 90 km/h to m/s.
- Convert 25°C to kelvin using 273.15.
Answers: 1) 3,600 m; 2) 0.750 L; 3) 40 cm²; 4) 3 g/cm³; 5) 25 m/s; 6) 298.15 K.
If you need more topic-specific practice, continue with step-by-step physics word problems, biology revision guidance, or the chemistry formulas reference. The best time to revisit units is before a mistake becomes a habit: write the units, make them cancel, and check the final quantity every time.